|
hardened axle/hub spacers
upgrade from "softer" spacers which may crush under extreme use and contribute to hub failure (info here)
Date: 02/14/2009
Views: 44
|
axle/hub spacer installed
axle/hub spacer in place next to outboard CV joint
Date: 03/22/2009
Views: 45
|
mirror upgrade
orignal mirrors were replaced with smaller Motrax Mirally convex mirrors to reduce huge front blind spot on driver's side
Date: 02/22/2009
Views: 49
|
chassis plate
fabricated a chassis ID plate - the US-built Ecotec Atom didn't have one like the TMI Atom 3 now does (photo of Atom 3 plate here)
Date: 03/24/2009
Views: 73
|
|
brake pressure switch
brake pressure switch (which triggers brake lights) is located in master cylinder and has gone bad
Date: 06/10/2009
Views: 50
|
pressure switch removal
the bad brake pressure switch was removed from the master cylinder and replaced with a banjo bolt to prevent this
Date: 10/12/2009
Views: 46
|
new brake switch
a bracket was fabbed to hold a roller switch above the brake pedal arm which will trigger the brake lights
Date: 10/12/2009
Views: 75
|
|
