|
ready for oven
Parts are abrasive blasted, degreased, then sprayed. Here they are prior to going into the oven for curing.
Date: 08/20/2007
Views: 228
|
hood fastener after
Date: 08/20/2007
Views: 211
|
panel fasteners
Date: 08/20/2007
Views: 222
|
windscreen screws 1
Date: 08/20/2007
Views: 208
|
|
windscreen screws 2
Date: 08/20/2007
Views: 190
|
seat bolts 1
Date: 08/20/2007
Views: 216
|
seat bolts 2
Date: 08/20/2007
Views: 204
|
steering bolts
Date: 08/20/2007
Views: 200
|
|
bias control bracket
Bracket powdercoated in satin black, and Tilton brake bias control installed.
Date: 08/20/2007
Views: 206
|
steering spacer
A 2-inch steering wheel spacer was fabricated from some spare aluminum and powdercoated in satin black.
Date: 08/20/2007
Views: 203
|
fender spacers
Satin black powdercoating on some aluminum fender spacers I made.
Date: 09/01/2007
Views: 197
|
tray fastener 1
Fasteners for rear tray, before and after. Custom gray/black powder mix used to match panel color and texture.
Date: 09/03/2007
Views: 197
|
|
tray fastener 2
Fasteners for rear tray, before and after. Custom gray/black powder mix used to match panel color and texture.
Date: 09/03/2007
Views: 235
|
tray screws 1
Screws for front tray, before and after. Custom gray/black powder mix used to match panel color and texture.
Date: 09/03/2007
Views: 177
|
tray screws 2
Screws for rear tray, before and after. Custom gray/black powder mix used to match panel color and texture.
Date: 09/03/2007
Views: 193
|
lighter socket
Lighter socket and bracket coated in satin black.
Date: 09/03/2007
Views: 206
|
|
bracket 6
The plate bracket was powdercoated satin black, and the rear of the license plate was painted to match.
Date: 03/16/2008
Views: 185
|
tow hooks
Tow hooks originally came from the factory in red, which stood out a little too much on my car. The red powdercoat was stripped, and they were re-coated satin black.
Date: 06/01/2008
Views: 188
|
strip coating 1
this stripper is available at a lot of auto parts & hardware stores
Date: 03/22/2009
Views: 160
|
strip coating 2
powder coating bubbles up within a few minutes - this stuff is amazing
Date: 03/22/2009
Views: 171
|
